VOLVO
TCM-0591 - Gear shift solenoid driver, even gears. Voltage too high
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
Hva betyr feilkoden?
The output stage for solenoid SHSS2, which controls the shifts for the even gears, is shorted to supply voltage. The solenoids also control the shift forks so that the correct gear is engaged. The fault means the mechatronic unit in the transmission must be replaced.
Mulige årsaker
- Connector or circuit board damaged or dirty
- Damaged solenoid
- Damaged transmission control module (TCM)
Hva du kan gjøre
- 1Read the fault codes, clear TCM-0591 and drive the car to see whether it returns
- 2Have a workshop read the fault with diagnostic equipment. The fault requires the mechatronic unit to be replaced
- 3Have a workshop replace the mechatronic unit and confirm that the fault code does not come back
Symptomer du kan merke1
- Yellow warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.