VOLVO
TCM-05A2 - Hydraulic pressure solenoid driver, odd gears. Current to high
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
Hva betyr feilkoden?
The current in the circuit for the output stage of solenoid CSPS1, which controls the hydraulic pressure over the clutch for the odd gears, is too high. The fault is caused by damaged cables or a damaged circuit board, or by a damaged transmission control module.
Mulige årsaker
- Damaged cables or circuit board
- Damaged transmission control module (TCM)
Hva du kan gjøre
- 1Read the fault codes, clear TCM-05A2 and drive the car to see whether it comes back
- 2Have a workshop check the cables and circuit board in the transmission with diagnostic equipment
- 3If the fault remains after this check, a workshop must replace the transmission control module
Symptomer du kan merke5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- No automatic gear changes
- No forward or reverse movement with a gear selected
- Shifts hard or jerky
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.