VOLVO
TCM-05B4 - Hydraulic pressure solenoid, clutch even gears. Hydraulic pressure to high
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
Hva betyr feilkoden?
Hydraulic pressure on clutch 2 (even gears) reads higher than requested. The cause is either a damaged output stage for solenoid CSPS1 or a damaged pressure sensor.
Mulige årsaker
- Damaged output stage, solenoid CSPS1
- Damaged pressure sensor
Hva du kan gjøre
- 1Read the fault codes, clear TCM-05B4 and drive the car to see whether it comes back
- 2Have a workshop read the pressure sensor and output stage with diagnostic equipment
- 3Have a workshop open the transmission control system and check the solenoids and oil level. Replace the mechatronic unit if the fault cannot be fixed
Symptomer du kan merke5
- Yellow warning symbol and text message in the display
- Shifts hard or jerky
- Gear changes take too long to complete
- Shifts too early, too late or too often
- No automatic gear changes
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.