VOLVO
TCM-E000 - Control module communication. Faulty communication
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (25)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003–2005Kun girkasse: AW50/51 AWD
- Volvo S60 (2001–2009)2006–2007Kun girkasse: AW50/51 AWD, TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun girkasse: AW50/51 AWD, TF-80SC
- Volvo S80 (1999–2006)1999–2004
- Volvo S80 (1999–2006)2005–2006Alle girkasser unntatt: M56
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2000–2002, 2008
- Volvo V70 (2000–2008)2003Alle girkasser unntatt: M58
- Volvo V70 (2000–2008)2004–2005Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2006–2007Alle girkasser unntatt: M58, M66 AWD
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2005Kun girkasse: AW50/51 AWD
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun girkasse: AW50/51 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2003, 2012, 2015
- Volvo XC90 (2003–)2004, 2006, 2011Alle girkasser unntatt: M66 AWD
- Volvo XC90 (2003–)2005Alle girkasser unntatt: M66 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2007Alle girkasser unntatt: M66 AWD, TF-80SC
- Volvo XC90 (2003–)2008–2010Kun girkasse: AW50/51 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Kun girkasse: AW50/51 AWD
Hva betyr feilkoden?
The transmission control module (TCM) ends up in a communication fault on the CAN network. The code is set when a serious disturbance is registered, or when the module cannot reach the other control modules. The fault may be in the wiring, a connector, the transmission control module itself or another module that is disturbing the network.
Mulige årsaker
- Short circuit between the CAN wires
- Open circuit in one of the CAN wires
- Contact resistance or oxidation in the connections
- Internal fault in the transmission control module
- Internal fault in another control module on the same part of the CAN network
Hva du kan gjøre
- 1Read the fault codes in all control modules. If there are codes for missing communication in the central electronic control module (CEM), troubleshoot those first
- 2With the ignition off, check the CAN wiring for open circuits, chafing and loose connectors
- 3Use a multimeter to check that the CAN wires are not shorted to ground or supply voltage
- 4Check the connectors at the transmission control module and at other modules on the network for contact resistance and oxidation
- 5Have a workshop measure the resistance in the CAN network and disconnect sections of the network to find which side is disturbing it
- 6Have a workshop replace the module that communicates incorrectly; the central electronic control module (CEM) is only replaced if troubleshooting shows an internal fault
Symptomer du kan merke3
- Missed gear changes
- Yellow warning symbol and text message in the display
- General warning lamp on
Hva feilen kan påvirke2
- The transmission control module switches itself off the CAN network (bus-off)
- It stays switched off until the power supply has been interrupted, then tries to communicate again
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.