VOLVO
TCM-E003 - Control module communication. Faulty configuration
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (15)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S60 (2001–2009)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Kun motor: D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
The transmission module (TCM) checks its configuration ID against the signal the central electronic control module (CEM) puts on the CAN network. The code is set when the IDs differ, or when communication with the CEM is interrupted. It can appear after a module has been replaced without the right software being downloaded.
Mulige årsaker
- Wrong CAN configuration ID, for example when the transmission control module is not intended for the car, as with a used module with different software or hardware
- Open circuit in the CAN wires between the transmission control module and the central electronic control module (CEM)
Hva du kan gjøre
- 1Has the transmission control module been replaced recently? It may then lack the correct software for the car; have a workshop check this
- 2Read the fault codes in all control modules and check whether any other module has communication faults
- 3With the ignition off, check that the connectors at the transmission control module and the CEM are fully engaged and free from oxidation
- 4Use a multimeter to check that the CAN wires are not shorted to ground or supply voltage
- 5Have a workshop download the correct software to the transmission control module and replace it as a last resort if the fault remains
Symptomer du kan merke2
- General warning lamp on
- Missed gear changes
Hva feilen kan påvirke1
- The control module switches to an emergency program
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.