Hva betyr feilkode TCM-P056300?

Diagnose og feilkodedefinisjon for TCM-P056300 (Volvo XC90 (2003–), Volvo XC90 (2003–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P056300 - System voltage high. General fault information. No information on fault type

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

1 modell

XC90 (2003–)

Vis modeller per årsmodell og motor (2)

Hva betyr feilkoden?

The transmission control module has registered that the system voltage is too high. It compares the voltage with the value that the central electronic control module (CEM) sends on the CAN network. The cause may be a battery charger with the wrong voltage, or an internal fault in the transmission control module.

Mulige årsaker

A battery charger with the wrong voltage has been used
Internal fault in the transmission control module

Hva du kan gjøre

1Read the fault code, clear it and road test the car to see whether it comes back
2If you have diagnostic equipment, read the voltage in live data with the engine idling and compare it with the battery
3Check that the battery terminals are tight and that no battery charger is connected
4Have a workshop check the charging system for too high a charging voltage and troubleshoot the CEM if no fault is found
5Have a workshop replace the transmission control module if it has an internal fault

Symptomer du kan merke2

The eco lamp is on
General warning lamp on

Hva feilen kan påvirke1

The control module switches to an emergency program

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.