Hva betyr feilkode TCM-P065800?

Diagnose og feilkodedefinisjon for TCM-P065800 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P065800 - Actuator Supply Voltage A Circuit Low. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The voltage from one of the transmission's three driver stages, which control the gearbox solenoids, is too low. The cause may be a damaged driver stage or a damaged control module. The other two driver stages can take over, but the function may then be limited.

Mulige årsaker

Damaged driver stage in the transmission control module
Damaged transmission control module

Hva du kan gjøre

1Read the fault code, clear it and road test the car to see whether it comes back
2Check whether the central electronic control module (CEM) has fault codes, since they can show that the supply voltage to the transmission module is too low
3Check the wires and connectors between the transmission control module and the CEM for oxidation and loose contacts
4Have a workshop road test the car with gear changes and replace the mechatronic unit if the fault remains

Symptomer du kan merke5

The malfunction indicator (Check engine) lamp comes on or behaves abnormally
Yellow warning symbol and text message in the display
The automatic gearbox shifts harshly or jerkily
No automatic shifting
The car does not move forwards or backwards in gear

Hva feilen kan påvirke1

Shifting may be limited, depending on which driver stage is damaged

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.