Hva betyr feilkode TCM-P06B100?

Diagnose og feilkodedefinisjon for TCM-P06B100 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P06B100 - Sensor Power Supply A Circuit Low. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

Although the code is named supply A, it concerns the voltage supply to the position sensors that check the shift forks for the odd gears and reverse. The transmission control module has registered that the voltage there is too low. The cause may be a supply wire shorted to ground, damaged wires or connectors, or a damaged control module.

Mulige årsaker

Supply wire shorted to ground
Damaged wires or connectors
Damaged transmission control module

Hva du kan gjøre

1Read the fault code, clear it and road test the car to see whether it comes back
2With the ignition off, check the wires and connectors to the transmission control module and the gearbox for chafing and loose contacts
3Use a multimeter to check that the supply wire is not shorted to ground
4If you have diagnostic equipment, read the voltage to the position sensors in live data; if it is outside the normal range the fault most likely lies in the module
5Have a workshop replace the transmission control module or the mechatronic unit if the fault remains; a new module must be programmed

Symptomer du kan merke5

The malfunction indicator (Check engine) lamp comes on or behaves abnormally
Yellow warning symbol and text message in the display
The automatic gearbox shifts harshly or jerkily
Shifting takes too long
The car does not move forwards or backwards in gear

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.