Hva betyr feilkode TCM-P06B200?

Diagnose og feilkodedefinisjon for TCM-P06B200 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P06B200 - Sensor Power Supply A Circuit High. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The transmission control module has registered that the voltage to the position sensors for the odd gears and reverse is too high. This may be a sensor wire shorted to supply voltage, or a damaged control module.

Mulige årsaker

Sensor supply wire shorted to supply voltage
Damaged transmission control module

Hva du kan gjøre

1Clear the fault code and road test the car to see whether it comes back
2With the ignition off, check the wires to the position sensors for chafing, damage and loose contacts
3Use a multimeter to check that the wire to the position sensors is not shorted to supply voltage
4If you have diagnostic equipment, read the voltage to the position sensors in live data; if it is outside the normal range the fault most likely lies in the module
5Have a workshop replace the transmission control module or the mechatronic unit if the fault remains

Symptomer du kan merke5

The malfunction indicator (Check engine) lamp comes on or behaves abnormally
Yellow warning symbol and text message in the display
No movement forwards or backwards in gear
The automatic gearbox shifts harshly or jerkily
Shifting takes too long

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.