VOLVO
TCM-P070600 - Transmission Range Sensor A Circuit Range/Performance. General Failure Information. No sub type information
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S80 (2007–)2007Alle girkasser unntatt: M66
- Volvo S80 (2007–)2008Alle motorer unntatt: B4204S3, B4204S4, D4204T · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2008–)2008Alle motorer unntatt: B4204S3, B4204S4, D4204T · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC70 (2008–)2008Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2005Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006Kun motor: B8444S · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012–2013Kun motor: B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
The transmission control module has registered an incorrect signal from the gear range sensor. For the selected gear to always be correct, the selector cable must be correctly fitted, adjusted and calibrated. The cause may be a cable that is wrongly fitted, or a range sensor that has not been calibrated.
Mulige årsaker
- Selector cable wrongly fitted
- Gear range sensor not calibrated
Hva du kan gjøre
- 1Check that the selector cable is correctly adjusted; have a workshop adjust it if needed
- 2Move the selector through all positions and check that the position shown matches the one selected
- 3Clear the fault code and road test the car to see whether it comes back
- 4Have a workshop calibrate the range sensor and replace the transmission control module if the code remains after calibration
Symptomer du kan merke2
- General warning lamp on
- Yellow warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.