Hva betyr feilkode TCM-P070700?

Diagnose og feilkodedefinisjon for TCM-P070700 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P070700 - Transmission Gear Position Sensor "A" Circuit Low. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

9 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The gear range sensor inside the transmission control module gives a signal that is too low. The sensor has two Hall sensors that detect the selector position, and a parallel Hall sensor is used for diagnosis. The fault may lie in the connector, a wire, the selector cable adjustment or the module itself.

Mulige årsaker

Contact resistance, oxidation or looseness in the connectors or connections
Signal wire shorted to ground
Misadjusted gear range sensor
Internal fault in the transmission control module

Hva du kan gjøre

1Check that the selector cable is correctly fitted and adjusted; have a workshop adjust it if needed
2With the ignition off, check the connector to the transmission control module for contact resistance, oxidation and looseness
3Use a multimeter to check that the signal wire is not shorted to ground
4Clear the fault code and road test the car to see whether it comes back
5Have a workshop replace the transmission control module if the fault remains; a new module must be programmed

Symptomer du kan merke3

Yellow warning symbol and text message in the display
The malfunction indicator (Check engine) lamp comes on or behaves abnormally
The engine does not start

Hva feilen kan påvirke2

The engine will not start while the fault is active
The control module switches to an emergency program

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.