Hva betyr feilkode TCM-P071622?

Diagnose og feilkodedefinisjon for TCM-P071622 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P071622 - Turbine/Input Shaft Speed Sensor A Circuit Range/Performance. General Signal Failures. Signal too high

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

Although the code is named inside or outside tolerance, it applies to a high signal from the input speed sensor that shows an unreasonably high speed. Gear changes may then not happen, since the control module cannot rely on the speed value.

Mulige årsaker

Input speed sensor not working

Hva du kan gjøre

1Read all stored codes: if the other speed sensors also have codes, the fault may lie in the control module that powers them
2Clear the code and road test the car to see whether it returns
3Have a workshop check the sensor and its connector, since the sensor sits inside the transmission
4If the fault is in the control module, it must be replaced, and the new module must be programmed by a workshop

Symptomer du kan merke2

No automatic gear change
No forward or reverse movement in gear

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.