VOLVO
TCM-P071700 - Turbine/input shaft speed sensor A circuit no signal. General fault information. No information on fault type
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellXC90 (2003–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The control module receives no signal from the input speed sensor, which measures the transmission input shaft. Without this signal the module cannot calculate gear change timing or keep shifts smooth, and lock-up is affected.
Mulige årsaker
- Higher resistance at a connection
- Input speed sensor not working
- A fault inside the TCM itself
Hva du kan gjøre
- 1If you have a diagnostic tool: read the input speed in live data at idle; if no value appears, the fault lies in the sensor, wiring or connector
- 2Read and clear the code, then road test to see whether it returns
- 3Have a workshop check the sensor connector for a loose fit and confirm the sensor is seated properly, since it sits inside the transmission
- 4If the sensor and wiring look sound, the fault may lie in the control module, which a workshop should check
Symptomer du kan merke5
- Emissions warning lamp (MIL) comes on
- The general warning lamp comes on
- Lock-up does not work
- Gear changes are harsh
- Gear changes do not happen
Hva feilen kan påvirke1
- The transmission is controlled by an auxiliary program
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.