VOLVO
TCM-P072268 - Output Shaft Speed Sensor Circuit No Signal. Algorithm Based Failures. Event information
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (16)
- Volvo S60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2012, 2015Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9, D5204T6 · Kun girkasse: TF-80SD
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D4162T · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, B4204T11, D4162T, D4204T14 · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2015Kun motor: B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2013–2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo XC60 (2009–)2015Kun motor: B5204T9 · Kun girkasse: TF-80SD AWD
Hva betyr feilkoden?
This is an event-driven information code and does not indicate a fault in the control module where it is active. It is always set together with another fault code, and that other code shows the real fault, so deal with that one first.
Mulige årsaker
- Higher resistance at a connection
- Output shaft speed sensor not seated correctly
- Output shaft speed sensor not working
- A fault inside the TCM itself
Hva du kan gjøre
- 1Read all stored codes: this code is always set together with another one, which is the real fault
- 2Deal with the other code first, following its own instructions
- 3Then clear the codes and road test; this code does not need separate work
- 4If the other code returns after the repair, have a workshop check it
Symptomer du kan merke5
- Lock-up does not work
- No automatic gear change
- Gear changes are harsh or jerky
- The PURE, SAVE and AWD drive modes switch off automatically and cannot be selected
- In HYBRID mode the combustion engine runs all the time or too often
Hva feilen kan påvirke1
- Electric propulsion is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.