VOLVO
TCM-P073171 - Gear 1 Incorrect Ratio. Mechanical Failures. Actuator stuck
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2014–2015Kun girkasse: TG-81SC
- Volvo S80 (2007–)2014–2015Kun girkasse: TG-81SC
- Volvo V40 (2013–)2015Kun girkasse: TG-81SC
- Volvo V40 Cross Country (2013–)2015Kun girkasse: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Kun girkasse: TG-81SC
- Volvo V60 Cross Country (2015–)2015Kun girkasse: TG-81SC
- Volvo V70 (2008–)2014–2015Kun girkasse: TG-81SC
- Volvo XC60 (2009–)2014–2015Kun girkasse: TG-81SC
- Volvo XC70 (2008–)2014–2015Kun girkasse: TG-81SC
Hva betyr feilkoden?
First gear is not engaging correctly inside the transmission: the ratio differs from the expected one because a component appears to be stuck. Brake B2 is not applied, so engine braking in first gear is not possible. The fault may be caused by a solenoid that is stuck or by a mechanical fault in the transmission.
Mulige årsaker
- Contact resistance or poor contact in the connectors to the linear pressure solenoids or the shift solenoid
- A linear pressure solenoid has stuck, or the shift solenoid has stuck in the off or on position
- One or more of the solenoids is damaged
- A fault inside the TCM or its control system
- Mechanical faults in the transmission
Hva du kan gjøre
- 1First read all codes: if any other transmission code is present, deal with it first, since it may be the root fault
- 2Clear the code and road test the car in first gear with engine braking to see whether it returns
- 3Have a workshop check the solenoid connectors, wiring and the solenoids themselves, since they sit inside the transmission
- 4If the fault remains, have a workshop look at the transmission's mechanics and check the control module
Symptomer du kan merke5
- No automatic gear change
- No forward or reverse movement in gear
- Gear changes happen too early, too late or too often
- Gear changes take a long time
- Gear changes are harsh or jerky
Hva feilen kan påvirke2
- Adaptation function is blocked
- Engine braking in first gear is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.