Hva betyr feilkode TCM-P079100?

Diagnose og feilkodedefinisjon for TCM-P079100 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P079100 - Intermediate Shaft Speed Sensor A Circuit. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The sensor that measures the input shaft speed for the odd gears 1, 3, 5 and reverse gives a value that is either too high or too low. The sensor sits inside the transmission, and its signal is also used to check the other two sensors.

Mulige årsaker

Damaged speed sensor

Hva du kan gjøre

1Read all codes: if the other speed sensors also have codes, the fault may lie in the control module that powers them
2Clear the code and road test to see whether it returns
3Have a workshop replace the sensor; if the fault lies in the control module, it must be replaced and programmed by a workshop

Symptomer du kan merke5

The malfunction indicator lamp (Check engine) comes on or behaves abnormally
Yellow warning symbol and text message in the display
No forward or reverse movement in gear
Gear changes are harsh or jerky
Gear changes take a long time

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.