VOLVO
TCM-P081500 - Upshift Switch Circuit. General Failure Information. No sub type information
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (17)
- Volvo S60 (2011–)2013Kun girkasse: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo S60 (2011–)2014–2015Alle girkasser unntatt: M66, MMT6, MPS6
- Volvo S80 (2007–)2013Kun girkasse: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo S80 (2007–)2014–2015Alle girkasser unntatt: M66, MMT6, MPS6
- Volvo V40 (2013–)2013–2014Kun girkasse: TF-80SD
- Volvo V40 (2013–)2015Kun girkasse: TF-80SD, TG-81SC
- Volvo V40 Cross Country (2013–)2013–2014Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle girkasser unntatt: M66, MPS6
- Volvo V60 (2011–)2013Kun girkasse: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo V60 (2011–)2014–2015Alle girkasser unntatt: M66, MMT6, MPS6
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2013Kun girkasse: TF-80SC, TF-80SC AWD, TF-80SD
- Volvo V70 (2008–)2014–2015Alle girkasser unntatt: M66, MMT6, MPS6
- Volvo XC60 (2009–)2013Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC60 (2009–)2014–2015Kun girkasse: TF-80SC, TF-80SC AWD, TG-81SC
- Volvo XC70 (2008–)2013Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC70 (2008–)2014–2015Alle girkasser unntatt: M66, M66 AWD
Hva betyr feilkoden?
The code concerns the signal from the gear selector control module (GSM) to the steering wheel paddles. The paddles must be activated by pulling them toward the wheel before they can be used for shifting. The code is set when the signal is missing or shown as incorrect, and it may then not be possible to shift with the paddles.
Mulige årsaker
- One or both steering wheel paddles are stuck in the pressed position
- One or both steering wheel paddles are stuck in the activated position
- Contact resistance, oxidation or a loose connection in connectors and joints
- Internal fault in the gear selector control module (GSM)
Hva du kan gjøre
- 1Check that both paddles move freely and return when you release them.
- 2Look for any paddle that is stuck in the pressed or activated position, and remove anything that may be blocking it.
- 3If you have a diagnostic tool: read the steering wheel paddle status in live data and check that it changes when you pull a paddle.
- 4Have a workshop check the connectors and wiring to the steering wheel paddles.
- 5If the paddles and their connectors are in order, have a workshop check the gear selector control module (GSM).
Symptomer du kan merke1
- Manual gear changes with the steering wheel paddles are not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.