VOLVO
TCM-P0B0B00 - Auxilliary Transmission Fluid Pump Motor Supply Voltage Circuit High. General Failure Information. No sub type information
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (16)
- Volvo S60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2012, 2015Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9, D5204T6 · Kun girkasse: TF-80SD
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D4162T · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, B4204T11, D4162T, D4204T14 · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2015Kun motor: B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2013–2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo XC60 (2009–)2015Kun motor: B5204T9 · Kun girkasse: TF-80SD AWD
Hva betyr feilkoden?
The transmission control module (TCM) has detected that the voltage to the electric transmission oil pump is too high. The pump supplies the gearbox with the right pressure and flow while automatic engine start/stop is active, and the control module can switch it off when the start/stop function is disabled. The fault is general and does not say more precisely what type of fault it is.
Mulige årsaker
- Voltage too high
- Damaged system relay
- The connector or cable to the pump is damaged
Hva du kan gjøre
- 1Read and note the fault code, clear it and drive the car to see if it returns
- 2Check that the connectors to the oil pump and system relay are not oxidized or loose, and that the cables are undamaged
- 3Have a workshop check the system relay for damage and power supply, and the voltage cable to the oil pump for an open circuit
Symptomer du kan merke2
- Automatic engine start/stop does not work while driving
- Automatic engine start/stop does not work at idle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.