VOLVO
TCM-P0C2B03 - Auxiliary Transmission Fluid Pump Control Module Feedback Signal. General Failure Information. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (16)
- Volvo S60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2012, 2015Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9, D5204T6 · Kun girkasse: TF-80SD
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D4162T · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, B4204T11, D4162T, D4204T14 · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2015Kun motor: B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2013–2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo XC60 (2009–)2015Kun motor: B5204T9 · Kun girkasse: TF-80SD AWD
Hva betyr feilkoden?
Although the fault code is named feedback signal, it applies to a signal fault running from the TCM to the electric oil pump. The pump supplies the gearbox with the right pressure and flow while automatic engine start/stop is active. The fault is general and does not say more precisely what type of fault it is.
Mulige årsaker
- Connector or cable is damaged
- Internal fault in the electric oil pump
Hva du kan gjøre
- 1Read and note the fault code, clear it and drive the car to see if it returns
- 2Have a workshop check the connectors on the control module and the oil pump for oxidation and loose connections, and the signal cables between them for an open circuit
- 3Have a workshop replace the electric oil pump if the fault remains
Symptomer du kan merke2
- Automatic engine start/stop does not work while driving
- Automatic engine start/stop does not work at idle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.