Hva betyr feilkode TCM-P171981?

Diagnose og feilkodedefinisjon for TCM-P171981 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P171981 - Engine Torque Signal. Bus Signal / Message Failures. Invalid serial data received

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

9 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The fault code concerns the engine torque signal on the CAN network, which the transmission control module uses for shift points and system pressure. The signal is indicated as faulty on either HS-CAN 1 or HS-CAN 2. The fault is general and does not say more precisely what type of fault it is; the cause may lie in the engine control module or in the CEM.

Mulige årsaker

Sporadic open or shorted CAN wire between the engine control module and the transmission control module
Fault in the engine control module (ECM)
Fault in the central electronic module (CEM)

Hva du kan gjøre

1Read the fault codes in the engine control module and the CEM, and fix those first
2This code can be cleared only after the root fault has been fixed and its fault code cleared
3Have a workshop check the CAN network between the engine control module and the transmission control module for open circuits and short-circuits

Symptomer du kan merke5

Warning symbol and text message in the display, and the check engine light lit
Engine stalls when a gear is engaged
Engine stalls when slowing down
Lockup does not work
Gear changes harsh or jerky

Hva feilen kan påvirke3

The transmission control module uses a basic value for the signal
Adaptation is blocked
Slip lock-up and automatic engine start/stop are switched off

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.