Hva betyr feilkode TCM-P271400?

Diagnose og feilkodedefinisjon for TCM-P271400 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P271400 - Pressure Control Solenoid D Performance/Stuck Off. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The fault code concerns the pressure for clutch 2, which controls the even gears. The control module has detected that the measured hydraulic pressure is lower than the requested pressure. The fault is general and does not say more precisely what type of fault it is.

Mulige årsaker

Low oil level in the gearbox
Damaged pressure sensor
Damaged power stage, solenoid CSPS2
Solenoid CSMS2, for clutch pressure, is damaged

Hva du kan gjøre

1Have a workshop check the gearbox oil level, as a low level can cause this code
2Have a workshop inspect solenoids CSPS2 and CSMS2 and the pressure sensor visually for oxidation, dirt and damage
3If no fault is found, have a workshop replace the mechatronic unit, as the fault is then in the solenoid or the control module

Symptomer du kan merke5

Warning symbol and text message in the display
Check engine light lit or behaving abnormally
Gear changes take too long, or occur too early, too late or too often
Gear changes harsh or jerky
No automatic gear change, and no forward or reverse movement with a gear engaged

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.