VOLVO
TCM-P271500 - Pressure Control Solenoid "SL3" Stuck ON. General Failure Information. No sub type information
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2014–2015Kun girkasse: TG-81SC
- Volvo S80 (2007–)2014–2015Kun girkasse: TG-81SC
- Volvo V40 (2013–)2015Kun girkasse: TG-81SC
- Volvo V40 Cross Country (2013–)2015Kun girkasse: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Kun girkasse: TG-81SC
- Volvo V60 Cross Country (2015–)2015Kun girkasse: TG-81SC
- Volvo V70 (2008–)2014–2015Kun girkasse: TG-81SC
- Volvo XC60 (2009–)2014–2015Kun girkasse: TG-81SC
- Volvo XC70 (2008–)2014–2015Kun girkasse: TG-81SC
Hva betyr feilkoden?
The fault code concerns line pressure solenoid SL3, which controls the pressure to the clutches. The control module has detected that the gear ratio stays the same when clutch C3 should have released. The shift is then cancelled so that clutches and brakes are not damaged. The fault is general and does not say more precisely what type of fault it is.
Mulige årsaker
- Incorrect adaptation values stored in the gearbox control module
- Contact resistance, oxidation or a loose joint at the plug of line pressure solenoid SL3
- Line pressure solenoid SL3 has jammed or is damaged
- Clutch C3 is damaged
- Poor quality of the transmission fluid
- Internal fault in the transmission's control system or in the transmission control module (TCM), or a mechanical fault in the gearbox
Hva du kan gjøre
- 1Read the fault codes in the gearbox and fix any other fault codes first, as they may be the cause
- 2Have a workshop check the transmission oil level and quality, as poor oil can cause the code
- 3Have a workshop check solenoid SL3, its connector and clutch C3, and replace the mechatronic unit if needed
Symptomer du kan merke5
- Warning symbol and text message in the display
- Check engine light lit or behaving abnormally
- The car lacks power
- Engine stalls when a gear is engaged or when slowing down
- No automatic gear change, and no forward or reverse movement with a gear engaged
Hva feilen kan påvirke3
- The control module blocks the gears that are not available
- Neutral control is blocked
- Automatic engine start/stop is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.