Hva betyr feilkode TCM-P281300?

Diagnose og feilkodedefinisjon for TCM-P281300 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P281300 - Pressure Control Solenoid "SL5" Control Circuit Range/Performance. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

9 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The transmission control module (TCM) has detected that the current in the circuit to linear pressure solenoid SL5 is incorrect. SL5 regulates the system pressure in the transmission, so the fault affects the gear changes. The cause may be in the circuit, in the solenoid or in the control module.

Mulige årsaker

Contact resistance, oxidation or poor connection at the SL5 connector or joint
Open circuit or short to ground in the wiring to SL5
Short to supply voltage in the wiring to SL5
SL5 is stuck
SL5 is damaged
Internal fault in the transmission control system or in the TCM

Hva du kan gjøre

1Read and note the code, clear it and road test the car to see whether it returns
2Check that the battery is in good condition and that the fuses are intact
3Check the transmission oil level and look for oil leaks
4If the fault returns, have a workshop with diagnostic equipment check SL5 and the wiring to it, and replace the mechatronic unit if needed

Symptomer du kan merke5

Message in the display
The malfunction indicator lamp comes on or behaves abnormally
Poor performance, the car lacks power
No automatic gear changes
No movement forward or in reverse with a gear selected

Hva feilen kan påvirke1

The control module switches to a fallback program

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.