VOLVO
TCM-P281400 - Pressure Control Solenoid "SL5" Control Circuit Low. General Failure Information. No sub type information
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2014–2015Kun girkasse: TG-81SC
- Volvo S80 (2007–)2014–2015Kun girkasse: TG-81SC
- Volvo V40 (2013–)2015Kun girkasse: TG-81SC
- Volvo V40 Cross Country (2013–)2015Kun girkasse: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Kun girkasse: TG-81SC
- Volvo V60 Cross Country (2015–)2015Kun girkasse: TG-81SC
- Volvo V70 (2008–)2014–2015Kun girkasse: TG-81SC
- Volvo XC60 (2009–)2014–2015Kun girkasse: TG-81SC
- Volvo XC70 (2008–)2014–2015Kun girkasse: TG-81SC
Hva betyr feilkoden?
The transmission control module (TCM) has detected that the current in the circuit to linear pressure solenoid SL5 is lower than allowed. SL5 regulates the system pressure in the transmission. The fault may lie in the circuit, in the solenoid or in the control module.
Mulige årsaker
- Contact resistance, oxidation or poor connection at the SL5 connector or joint
- Open circuit or short to ground in the wiring to SL5
- SL5 is stuck
- SL5 is damaged
- Internal fault in the transmission control system or in the TCM
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the battery is in good condition and that the fuses are intact
- 3Check the transmission oil level and look for leaks
- 4If the fault returns, have a workshop check SL5, the wiring to ground and the control module, and replace the mechatronic unit if needed
Symptomer du kan merke5
- Message in the display
- Poor performance, the car lacks power
- No automatic gear changes
- No movement forward or in reverse with a gear selected
- Automatic engine start and stop does not work
Hva feilen kan påvirke3
- Gears that are not available are blocked
- Adaptation and neutral control are blocked
- Automatic engine start and stop is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.