Hva betyr feilkode TCM-P283100?

Diagnose og feilkodedefinisjon for TCM-P283100 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P283100 - Shift Fork A Position Circuit. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The position sensor for shift fork A gives the transmission control module (TCM) information about the fork position. The control module uses this to engage the gears mechanically. The code shows that the position of shift fork A is unreasonable.

Mulige årsaker

Damaged position sensor
The sensor is in an incorrect position
Incorrect voltage supply to the sensor
Damaged transmission control module (TCM)

Hva du kan gjøre

1Read all transmission codes, deal with any other transmission codes first, then clear this code
2If you have a diagnostic tool: read the signal from the position sensor for shift fork A in live data and check whether any value stands out
3Have a workshop check the voltage supply to the position sensors
4Have a workshop decide whether the mechatronic unit needs replacing; if the values are outside or at the limit it should be replaced

Symptomer du kan merke5

The malfunction indicator lamp (check engine light) comes on or behaves abnormally
Yellow symbol and text message in the display
Harsh or jerky gear changes
No movement forward or in reverse with a gear selected
Shifts occur too early, too late or too often

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.