Hva betyr feilkode TCM-P284000?

Diagnose og feilkodedefinisjon for TCM-P284000 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P284000 - Shift Fork D Position Circuit. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The position sensor for shift fork D tells the transmission control module (TCM) where the fork is, and the control module uses this when engaging gears. The code shows that the fork position is unreasonable, which can affect the gear changes.

Mulige årsaker

Damaged position sensor
The sensor gives an incorrect position
Incorrect voltage supply to the sensor
Damaged transmission control module (TCM)

Hva du kan gjøre

1Read all transmission codes, deal with any other transmission codes first, then clear this code
2If you have a diagnostic tool: compare the position sensor for shift fork D with the other three in live data and see whether it differs
3Have a workshop measure the voltage supply to the position sensors and decide whether the control module needs replacing
4If the values are outside or at the limit, have a workshop replace the mechatronic unit

Symptomer du kan merke5

The malfunction indicator lamp (check engine light) comes on or behaves abnormally
Yellow symbol and text message in the display
Harsh or jerky gear changes
Gear changes take too long
No automatic gear changes

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.