Hva betyr feilkode TCM-P285100?

Diagnose og feilkodedefinisjon for TCM-P285100 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P285100 - Shift Fork Position Sensor A/B Correlation. General Failure Information. No sub type information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

The control module has detected that two odd gears are engaged at the same time. The transmission has a mechanical interlock meant to prevent this, so the fault may come from a damaged position sensor, or from a damaged interlock together with a hydraulic fault. The cause is hard to track down.

Mulige årsaker

Damaged position sensor
Faulty interlock combined with a hydraulic fault

Hva du kan gjøre

1Read the other transmission codes first and deal with them
2Checking the sensor alone is not enough, as the fault occurs together with a hydraulic fault; have a workshop diagnose it
3The whole transmission may need replacing, since the hydraulic fault can sit both inside and outside the mechatronic unit

Symptomer du kan merke5

The malfunction indicator lamp (check engine light) comes on or behaves abnormally
Yellow symbol and text message in the display
Shifts occur too early, too late or too often
No movement forward or in reverse with a gear selected
Harsh or jerky gear changes

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.