Hva betyr feilkode TCM-P285568?

Diagnose og feilkodedefinisjon for TCM-P285568 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-P285568 - Clutch A Pressure Charge Performance. Algorithm Based Failures. Event information

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (24)

Hva betyr feilkoden?

This is an event code showing that the ready pressure for clutch A has been adapted to a value outside the permitted tolerance. It does not point to a fault in the control module where the code appears; it is information. Gear changes may then take a long time or happen too early, too late or too often.

Mulige årsaker

Leak in the hydraulic system
Dirt in the hydraulic system
Damaged clutch unit

Hva du kan gjøre

1Deal first with any stored codes for solenoids CSPS1 and CSPS2, as they control the hydraulic pressure of the clutches
2Check the transmission oil level and condition, and look for oil leaks
3Have a workshop replace the mechatronic unit if solenoid codes are stored, and the clutch unit if needed; if the fault remains, the transmission has to be replaced

Symptomer du kan merke2

Gear changes take too long
Shifts occur too early, too late or too often

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.