VOLVO
TCM-P300787 - Ambient Temperature. Bus Signal / Message Failures. Missing message
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (16)
- Volvo S60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2012, 2015Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T · Kun girkasse: TF-80SD
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9, D5204T6 · Kun girkasse: TF-80SD
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D4162T · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, B4204T11, D4162T, D4204T14 · Kun girkasse: TF-80SD, TF-80SD AWD
- Volvo V60 (2011–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV · Kun girkasse: TF-80SD
- Volvo V60 (2011–)2015Kun motor: B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2012Kun motor: D5204T3 · Kun girkasse: TF-80SD
- Volvo V70 (2008–)2013–2015Kun motor: D5204T3, D5204T7 · Kun girkasse: TF-80SD
- Volvo XC60 (2009–)2015Kun motor: B5204T9 · Kun girkasse: TF-80SD AWD
Hva betyr feilkoden?
The transmission control module (TCM) does not receive an ambient temperature signal from the engine control module over the CAN network, or the signal is marked as faulty. The control module then uses a default value in place of the real outside temperature.
Mulige årsaker
- Contact resistance or oxidation in connectors and joints
- Open circuit in one of the CAN wires
- Short circuit between the CAN wires
- The fault may lie in the engine control module (ECM)
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Have a workshop read the codes in the engine control module, as troubleshooting should start there
- 3Have a workshop check the CAN wires for open circuit and short between them, and check the connectors
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The transmission control module uses a default value for the ambient temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.