Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    TVM-U300054
    VOLVO

    TVM-U300054 - Control Module. System Programming Failures. Missing calibration

    System

    Ukjent system / Merkespesifikk

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2012–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2012–2015
    • Volvo XC60 (2009–)2011–2015
    • Volvo XC70 (2008–)2012–2015

    Hva betyr feilkoden?

    The TV module takes its settings from the vehicle configuration file held in the central electronic module (CEM). The code is set when the TV module's configuration does not match the car's. If the infotainment theft protection (ITP) is active, the module is blocked from communicating on the MOST network.

    Mulige årsaker

    • The infotainment theft protection (ITP) is activated
    • The TV module does not suit this car, for example if a second-hand module with other software or hardware has been used
    • Interference in the communication between the TV module (TVM) and the infotainment module (ICM)
    • Interference in the communication between the infotainment module (ICM) and the central electronic module (CEM)
    • The car's configuration file is incorrect

    Hva du kan gjøre

    1. 1Read off the code, clear it and test-drive the TV function to see whether it returns.
    2. 2Check that the connectors between the TV module, the infotainment module and the central electronic module are firmly seated and not corroded.
    3. 3If the TV module has been replaced, check that it is the right one for this particular car, since a second-hand unit can cause the fault.
    4. 4If the TV module has been replaced it needs the correct software and approval from the theft protection. Have a workshop do this.
    5. 5If the fault remains, have a workshop check the configuration in the car and replace the TV module if needed.

    Symptomer du kan merke2

    • TV function does not work
    • Other problems with the TV function

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.