VOLVO
UEM-0094 - Seat belt reminder. Signal too high
System
Takmodul (UEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The UEM is instructed over the CAN network about the seat belt reminder lamp. The code is set when the UEM has been told the lamp should be off but it is lit anyway. The cause is a defective UEM.
Mulige årsaker
- The upper electronic module (UEM) is defective, with an internal fault
Hva du kan gjøre
- 1Switch the ignition on and see whether the seat belt reminder lamp lights when it should not.
- 2Read off the code, clear it and check whether it returns.
- 3Check whether anything suggests a fault in the feed to the upper electronic module.
- 4If the fault remains, have a workshop read out the programmed data if possible and replace the upper electronic module.
Symptomer du kan merke2
- The seat belt reminder lamp stays lit all the time
- The seat belt reminder lamp shines weakly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.