VOLVO
CEM-1C10 - Control module. Configuration fault
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The CEM has found a fault in the vehicle configuration file, because the file does not specify any type of generator. The battery may discharge. The fault is fixed by configuring and reprogramming the control module, which a workshop does.
Mulige årsaker
- The vehicle configuration is incorrect
Hva du kan gjøre
- 1Check that the battery terminals and cable connections are clean and tight
- 2With the ignition on, check whether the code returns after switching the ignition off and on again
- 3Have a workshop check and correct the configuration, since the module must be reprogrammed with diagnostic equipment
- 4If the fault has only occurred occasionally, assess it with the workshop case by case
- 5After the work, clear the code and check that the battery does not discharge
Symptomer du kan merke1
- The battery discharges
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.