Sentral elektronikk (CEM)
Volvo C30 Electric (2011–2013) – feilkoder Sentral elektronikk (CEM)
235 feilkoder
Samme feilkode kan bety ulike ting avhengig av årsmodell og motor. Derfor vises hver betydning på en egen rad, med nøyaktig hvilke biler den gjelder.
Feilkodebeskrivelsene finnes på svensk og engelsk og vises her på engelsk.
| Feilkode | Betydning |
|---|---|
| CEM-1011 | Control module, memory fault. Internal fault2011–2013 |
| CEM-1012 | Control module, memory fault. Internal fault2011–2013 |
| CEM-101A | Control module, memory fault. Internal fault2011–2013 |
| CEM-101B | Control module, memory fault. Internal fault2011–2013 |
| CEM-1201 | Control module. Configuration fault2011–2013 |
| CEM-1A21 | Engine control module (ECM). Signal too low2011–2013 |
| CEM-1A22 | Engine control module (ECM). Signal too high2011–2013 |
| CEM-1A40 | 50-power supply. Activated too long2011–2013 |
| CEM-1A41 | Ignition switch. Faulty signal2011–2013 |
| CEM-1A42 | Real time clock. Faulty signal2011–2013 |
| CEM-1B01 | Main Battery Diode, General electrical failure2011–2013 |
| CEM-1B02 | Main Battery Relay, General electrical failure2011–2013 |
| CEM-1B03 | Main Battery Diode Or Relay, General electrical failure2011–2013 |
| CEM-1C04 | 30-power supply. Signal too high2011–2013 |
| CEM-1C10 | Control module. Configuration fault2011–2013 |
| CEM-1D08 | Control module. Internal fault2011–2013 |
| CEM-1D09 | Control module. Internal fault2011–2013 |
| CEM-2E01 | Relay, horn Signal too low2011–2013 |
| CEM-2E02 | Relay, horn Signal too high2011–2013 |
| CEM-2E03 | Comfort Relay, Signal too low2011–2013 |
| CEM-2E04 | Comfort Relay, Signal too high2011–2013 |
| CEM-2F60 | Twilight sensor. Signal too high2011–2013 |
| CEM-2F61 | Twilight sensor. Signal too low2011–2013 |
| CEM-3A00 | ECM software. Faulty signal2011–2013 |
| CEM-3A04 | Fuel pump (FP). Signal too high2011–2013 |
| CEM-3A05 | Fuel pump (FP). Signal too low2011–2013 |
| CEM-3A07 | Fuel pump (FP). Faulty signal2011–2013 |
| CEM-3A08 | Fuel pump (FP). Signal too high2011–2013 |
| CEM-3F01 | Clutch pedal sensor. Signal too low2011–2013 |
| CEM-3F02 | Clutch pedal sensor. Faulty signal2011–2013 |
| CEM-3F41 | Supply pedal sensor. Signal too low2011–2013 |
| CEM-3F42 | Supply pedal sensor. Signal too high2011–2013 |
| CEM-3F92 | Accelerator pedal (AP) position sensor. Signal too high2011–2013 |
| CEM-3F93 | Accelerator pedal (AP) position sensor. Signal too low2011–2013 |
| CEM-4A33 | Fuel level sensor. Faulty signal2011–2013 |
| CEM-4A34 | Fuel level sensor. Signal too low2011–2013 |
| CEM-4C01 | Outside temperature sensor. Signal too high2011–2013 |
| CEM-4C02 | Outside temperature sensor. Signal too low2011–2013 |
| CEM-4E24 | Malfunction indicator lamp (MIL). Faulty signal2011–2013 |
| CEM-4E25 | Malfunction indicator lamp (MIL). Signal too high2011–2013 |
| CEM-4F30 | Battery temperature. Signal too high2011–2013 |
| CEM-4F31 | Battery temperature. Signal too low2011–2013 |
| CEM-4F32 | Battery temperature. Faulty signal2011–2013 |
| CEM-4F33 | Battery Temperature Faulty Signal2011–2013 |
| CEM-4F40 | Seat belt buckle, right rear seat. Signal too low2011–2013 |
| CEM-4F41 | Seat belt buckle, right rear seat. Signal too high2011–2013 |
| CEM-4F42 | Seat belt buckle, rear right-hand. Faulty signal2011–2013 |
| CEM-4F44 | Seat belt buckle, rear center. Signal too low2011–2013 |
| CEM-4F45 | Seat belt buckle, rear center. Signal too high2011–2013 |
| CEM-4F46 | Seat belt buckle, rear center. Faulty signal2011–2013 |
| CEM-4F48 | Seat belt buckle, rear left-hand. Signal too low2011–2013 |
| CEM-4F49 | Seat belt buckle, rear left-hand. Signal too high2011–2013 |
| CEM-4F4A | Seat belt buckle, rear left-hand. Faulty signal2011–2013 |
| CEM-4F81 | Lamp, seat belt reminder. Signal too low2011–2013 |
| CEM-4F82 | Lamp, seat belt reminder. Faulty signal2011–2013 |
| CEM-5A10 | Blower fan motor. Blocked2011–2013 |
| CEM-5A12 | Blower fan motor. Over heated2011–2013 |
| CEM-5A13 | Blower fan motor. Voltage too high2011–2013 |
| CEM-5A15 | Blower fan motor. Current too high2011–2013 |
| CEM-5A17 | Blower fan motor Signal too high/Signal missing2011–2013 |
| CEM-5E01 | Sun sensor. Faulty signal2011–2013 |
| CEM-5E02 | Sun sensor. Signal too low2011–2013 |
| CEM-5E03 | Sun sensor Signal too high2011–2013 |
| CEM-5E04 | Sun sensor Signal too low2011–2013 |
| CEM-6C05 | Central locking driver's door. No locking2011–2013 |
| CEM-6C06 | Central locking passenger door. No locking2011–2013 |
| CEM-6C28 | Alarm LED. Faulty signal2011–2013 |
| CEM-6C29 | Alarm LED. Signal too low2011–2013 |
| CEM-6C30 | Siren. Internal fault2011–2013 |
| CEM-6C31 | Siren. Internal fault2011–2013 |
| CEM-6C32 | Movement sensor. Signal missing2011–2013 |
| CEM-6C33 | Movement sensor. Signal missing2011–2013 |
| CEM-6C34 | Switch reduced alarm. Activated too long2011–2013 |
| CEM-6C3A | Glass break wire. Signal too high2011–2013 |
| CEM-6C3B | Glass break wire manipulation protection2011–2013 |
| CEM-6C41 | Start control module (SCU). Incorrect key ID2011–2013 |
| CEM-6C42 | Start control module (SCU). Signal missing2011–2013 |
| CEM-6C43 | Start control module (SCU). Faulty signal2011–2013 |
| CEM-6C44 | Steering column lock module (SCL). Faulty signal2011–2013 |
| CEM-6C47 | Steering column lock module (SCL). Faulty signal2011–2013 |
| CEM-6C49 | Steering column lock module (SCL). Faulty signal2011–2013 |
| CEM-6C4C | Steering column lock module (SCL). Signal too low2011–2013 |
| CEM-6C50 | Steering column lock module (SCL). Not programmed2011–2013 |
| CEM-6C51 | Steering column lock module (SCL). Faulty signal2011–2013 |
| CEM-6C52 | Steering column lock module (SCL). Faulty signal2011–2013 |
| CEM-6C53 | Steering column lock module (SCL). Internal fault2011–2013 |
| CEM-6C54 | Engine control module (ECM) communication. Incorrect value2011–2013 |
| CEM-6C55 | KVM communication. Faulty value2011–2013 |
| CEM-6C56 | Steering column lock module (SCL). Faulty communication2011–2013 |
| CEM-6C57 | Phone module (PHM) not valid. Faulty signal2011–2013 |
| CEM-6F10 | Sun roof. Signal too high2011–2013 |
| CEM-6F11 | Sun roof. Faulty signal2011–2013 |
| CEM-6F12 | Sun roof. Faulty signal2011–2013 |
| CEM-6F13 | Sun roof. Signal too high2011–2013 |
| CEM-6F51 | Tailgate handle. Faulty signal2011–2013 |
| CEM-6F52 | Tailgate handle. Signal too low2011–2013 |
| CEM-6F53 | Tailgate handle. Activated too long2011–2013 |
| CEM-6F83 | Dimmer Faulty signal2011–2013 |
| CEM-6F84 | Fuel Flap Driver Faulty Signal2011–2013 |
| CEM-6F85 | Dimmer. Signal too low2011–2013 |
| CEM-6F86 | Fuel tank filler cap. Signal too low2011–2013 |
| CEM-6F87 | Fuel tank filler cap. Activated too long2011–2013 |
| CEM-8A02 | Relay, high beam. Internal fault2011–2013 |
| CEM-8A03 | Relay, high beam. Internal fault2011–2013 |
| CEM-8A04 | LED Light Switch, Automatic Bending Light Signal too High2011–2013 |
| CEM-8A05 | LED Light Switch, Automatic Bending Light Faulty Signal2011–2013 |
| CEM-8A08 | Low beam right. Signal too low2011–2013 |
| CEM-8A09 | Low beam right. Faulty signal2011–2013 |
| CEM-8A11 | Low beam left. Signal too low2011–2013 |
| CEM-8A12 | Low beam left. Faulty signal2011–2013 |
| CEM-8B02 | Left parking lamps. Signal too low2011–2013 |
| CEM-8B03 | Left parking lamps. Faulty signal2011–2013 |
| CEM-8B05 | Right parking lamps. Faulty signal2011–2013 |
| CEM-8B06 | Right parking lamps. Signal too low2011–2013 |
| CEM-8B08 | Light switch module (LSM). Signal too low2011–2013 |
| CEM-8B09 | Light switch module (LSM). Faulty signal2011–2013 |
| CEM-8C10 | Relay, front fog lamps. Signal too high2011–2013 |
| CEM-8C11 | Relay, front fog lamps. Faulty signal2011–2013 |
| CEM-8C20 | Rear fog lamp. Faulty signal2011–2013 |
| CEM-8C21 | Rear fog lamp. Signal too low2011–2013 |
| CEM-8D01 | Stop lamp switch. Comparison fault2011–2013 |
| CEM-8D03 | High level stop lamp. Signal too high2011–2013 |
| CEM-8D04 | High level stop lamp. Signal too low2011–2013 |
| CEM-8D05 | Right-hand stop lamp. Signal too low2011–2013 |
| CEM-8D06 | Right-hand stop lamp. Faulty signal2011–2013 |
| CEM-8D07 | Left-hand stop lamp. Signal too low2011–2013 |
| CEM-8D08 | Left-hand stop lamp. Faulty signal2011–2013 |
| CEM-8D09 | Brake lamp left. Faulty signal2011–2013 |
| CEM-8D0A | Brake lamp left. Faulty signal2011–2013 |
| CEM-8D10 | Brake light switch Compare error2011–2013 |
| CEM-8E01 | Relay, back-up (reversing) lamp. Internal fault2011–2013 |
| CEM-8E02 | Relay, back-up (reversing) lamp. Internal fault2011–2013 |
| CEM-8F01 | Switch, hazard warning signal flashers. Faulty signal2011–2013 |
| CEM-8F02 | Switch, hazard warning signal flashers. Signal too low2011–2013 |
| CEM-8F21 | Wiper motor module (WMM). Internal fault2011–2013 |
| CEM-8F22 | Wiper motor module (WMM). Voltage too low2011–2013 |
| CEM-8F23 | Wiper motor module (WMM). Voltage too high2011–2013 |
| CEM-8F24 | Wiper motor module (WMM). Jammed2011–2013 |
| CEM-8F26 | Relay, front windshield washer motor. Internal fault2011–2013 |
| CEM-8F27 | Relay, front windshield washer motor. Internal fault2011–2013 |
| CEM-8F28 | Tailgate washer motor relay. Internal fault2011–2013 |
| CEM-8F29 | Tailgate washer motor relay. Internal fault2011–2013 |
| CEM-8F30 | Relay, headlamp wash / wipe. Faulty signal2011–2013 |
| CEM-8F31 | Relay, headlamp wash / wipe. Signal too high2011–2013 |
| CEM-8F33 | Right-hand turn signal lamp. Faulty signal2011–2013 |
| CEM-8F34 | Right-hand turn signal lamp. Signal too low2011–2013 |
| CEM-8F37 | turn signal lamp. Faulty signal2011–2013 |
| CEM-8F38 | turn signal lamp. Signal too low2011–2013 |
| CEM-8F61 | Relay, heated rear windshield. Faulty signal2011–2013 |
| CEM-8F62 | Relay, heated rear windshield. Signal too high2011–2013 |
| CEM-8FA2 | Relay, horn. Activated too long2011–2013 |
| CEM-8FB1 | Rain sensor module (RSM). Internal fault2011–2013 |
| CEM-8FB2 | Rain sensor module (RSM). Faulty function2011–2013 |
| CEM-9A01 | Interior lighting. Signal too high2011–2013 |
| CEM-9A02 | Interior lighting. Signal too low2011–2013 |
| CEM-9D01 | Communication with RRX control module. Comminicational problems2011–2013 |
| CEM-9F31 | Dimmer. Signal too high2011–2013 |
| CEM-9F32 | Dimmer. Faulty signal2011–2013 |
| CEM-9F33 | Brake fluid level too low2011–2013 |
| CEM-AFE0 | TPMS Default Values in Local Configuration2011–2013 |
| CEM-AFE1 | TPMS Incorrect Configuration2011–2013 |
| CEM-AFF1 | Localisation failed2011–2013 |
| CEM-AFF2 | Tire pressurement sensor. Faulty signal2011–2013 |
| CEM-AFF3 | Tire pressurement sensor. Faulty signal2011–2013 |
| CEM-AFF4 | Tire pressurement sensor. Faulty signal2011–2013 |
| CEM-AFF5 | Tire pressurement sensor. Faulty signal2011–2013 |
| CEM-AFF6 | Tire pressurement sensor. Signal missing2011–2013 |
| CEM-AFF7 | Tire pressurement sensor. Signal missing2011–2013 |
| CEM-AFF8 | Tire pressurement sensor. Signal missing2011–2013 |
| CEM-AFF9 | Tire pressurement sensor. Signal missing2011–2013 |
| CEM-AFFA | Tire pressurement sensor. Low battery2011–2013 |
| CEM-AFFB | Tire pressurement sensor. Low battery2011–2013 |
| CEM-AFFC | Tire pressurement sensor. Low battery2011–2013 |
| CEM-AFFD | Tire pressurement sensor. Low battery2011–2013 |
| CEM-AFFE | Missing tire pressure sensor Signal missing2011–2013 |
| CEM-CFF0 | MMS Communication Faulty Signal2011–2013 |
| CEM-DD00 | LIN-bus 3. Communication fault2011–2013 |
| CEM-DD01 | LIN-bus 3. Communication missing2011–2013 |
| CEM-DD02 | LIN-bus 3. Communication fault2011–2013 |
| CEM-DD03 | LIN-bus 14 Communication fault2011–2013 |
| CEM-DD04 | LIN-bus 14 Communication missing2011–2013 |
| CEM-DD05 | LIN-bus 14 Communication fault2011–2013 |
| CEM-DD06 | Communication with Battery Monitoring Sensor (BMS) Signal missing2011–2013 |
| CEM-DD07 | Battery Monitoring Sensor (BMS) faulty hardware2011–2013 |
| CEM-DD0A | LIN-bus 3. Communication fault2011–2013 |
| CEM-DD0B | LIN-bus 3. Communication missing2011–2013 |
| CEM-DD0C | LIN-bus 3. Communication fault2011–2013 |
| CEM-DD10 | Communication with SCL control module. Signal missing2011–2013 |
| CEM-DD11 | Communication with SCU control module. Signal missing2011–2013 |
| CEM-DD12 | Communication with the left-hand gas discharge lamp module (GDL). Signal missing2011–2013 |
| CEM-DD13 | Communication with the right-hand gas discharge lamp module (GDL). Signal missing2011–2013 |
| CEM-DD1A | Communication with RRX control module. Signal missing2011–2013 |
| CEM-DD1B | Communication with SCM control module. Signal missing2011–2013 |
| CEM-DD1C | Communication with SCM control module Faulty signal2011–2013 |
| CEM-DD21 | LIN bus 9. No communication2011–2013 |
| CEM-DD22 | LIN bus 9. Communication fault2011–2013 |
| CEM-DD30 | Communication with the wiper motor module (WMM). Signal missing2011–2013 |
| CEM-DD31 | Communication with the rain sensor module (RSM). Signal missing2011–2013 |
| CEM-DD32 | Communication with Humidity Sensor (HUS) Signal Missing2011–2013 |
| CEM-DD40 | Humidity Sensor (HUS) Internal Fault2011–2013 |
| CEM-DE01 | Communication with the brake control module (BCM). Signal missing2011–2013 |
| CEM-DE11 | Communication with ECM control module. Signal missing2011–2013 |
| CEM-DE18 | Communication with the combustion preheater module (CPM). Signal missing2011–2013 |
| CEM-DE1A | Communication with DEM control module. Signal missing2011–2013 |
| CEM-DE23 | Communication with the trailer module (TRM). Signal missing2011–2013 |
| CEM-DE29 | Communication with the climate control module (CCM). Signal missing2011–2013 |
| CEM-DE2D | Communication with KVM control module. Signal missing2011–2013 |
| CEM-DE2E | Communication with the power seat module (PSM). Signal missing2011–2013 |
| CEM-DE30 | Communication with the electric power steering module (EPS). Signal missing2011–2013 |
| CEM-DE43 | Communication with the driver door module (DDM). Signal missing2011–2013 |
| CEM-DE45 | Communication with the passenger door module (PDM). Signal missing2011–2013 |
| CEM-DE49 | Communication with the steering wheel module (SWM). Signal missing2011–2013 |
| CEM-DE51 | Communication with the driver information module (DIM). Signal missing2011–2013 |
| CEM-DE52 | Communication with the Accessory Electronic Module (AEM). Signal missing2011–2013 |
| CEM-DE54 | Communication with the infotainment control module (ICM). Signal missing2011–2013 |
| CEM-DE58 | Communication with the supplemental restraint system module (SRS). Signal missing2011–2013 |
| CEM-DE63 | communication with the parking assistance module (PAM). Signal missing2011–2013 |
| CEM-DE64 | Communication with the phone module (PHM). Signal missing2011–2013 |
| CEM-DE6E | Communication with the transmission control module (TCM). Signal missing2011–2013 |
| CEM-DE70 | Communication with Headlamp Control Module (HCM) Signal Missing2011–2013 |
| CEM-DF01 | CAN-H, low speed network. Signal missing2011–2013 |
| CEM-DF03 | CAN-H, low speed network. Signal too high2011–2013 |
| CEM-DF04 | CAN-L, low speed network. Signal too low2011–2013 |
| CEM-DF05 | CAN-H, low speed network. Signal too low2011–2013 |
| CEM-DF06 | CAN-L, low speed network. Signal too high2011–2013 |
| CEM-DF07 | CAN-L, low speed network. Faulty signal2011–2013 |
| CEM-DF11 | CAN-H, high speed network. Signal missing2011–2013 |
| CEM-DF13 | CAN-H, high speed network. Signal too high2011–2013 |
| CEM-DF14 | CAN-L, high speed network. Signal too low2011–2013 |
| CEM-DF15 | CAN-H, high speed network. Signal too low2011–2013 |
| CEM-DF16 | CAN-L, high speed network. Signal too high2011–2013 |
| CEM-DF17 | CAN-L, high speed network. Faulty signal2011–2013 |
| CEM-E000 | Communication with control module. Faulty communication2011–2013 |
| CEM-E001 | Communication with control module. Faulty communication2011–2013 |
| CEM-E00A | Communication with control module. Faulty communication2011–2013 |