Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-DF13
    VOLVO

    CEM-DF13 - CAN-H, high speed network. Signal too high

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    10 modeller

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo S60 (2001–2009)2005–2009
    • Volvo S80 (1999–2006)2005–2006
    • Volvo V50 (2004–2013)2004–2012
    • Volvo V70 (2000–2008)2005–2008
    • Volvo V70 XC / XC70 (2001–2007)2005–2007
    • Volvo XC90 (2003–)2005–2015

    Hva betyr feilkoden?

    The CEM registers CAN H in the high speed network as short-circuited to supply voltage. Throttle response and performance can then suffer, and the transmission control module (TCM) runs with limited function. The fault most often lies in the high speed network wiring.

    Mulige årsaker

    • Short to supply on the high speed network

    Hva du kan gjøre

    1. 1Check whether performance is reduced and whether any warning lamp is lit. This helps you judge how much of the car is affected
    2. 2Check the harness in the high speed network for chafing, pinch damage and moisture
    3. 3With a diagnostic tool, read the fault codes from all control modules and see which ones show communication faults
    4. 4Use a multimeter to check that the CAN H wire has no contact with supply voltage when it should not
    5. 5Check the connectors in the high speed network for loose connections and corrosion
    6. 6With the car in limp mode, do not drive far or in heavy traffic; have a workshop repair the fault

    Symptomer du kan merke5

    • The malfunction indicator lamp is lit
    • Performance is reduced
    • The accelerator pedal responds poorly
    • Radio interference
    • A message appears in the text display

    Hva feilen kan påvirke1

    • The transmission control module (TCM) runs with limited function

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.