Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-DE2E
    VOLVO

    CEM-DE2E - Communication with the power seat module (PSM). Signal missing

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C30 Electric (2011–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (4)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo V50 (2004–2013)2004–2012

    Hva betyr feilkoden?

    The central electronic module (CEM) gets no response from the power seat module (PSM), so the automatic seat and mirror adjustment does not work. The fault is set when communication on the CAN network breaks down. The usual causes are power supply, earth or a loose connector at the seat module.

    Mulige årsaker

    • No supply to the seat module (PSM), for example from a blown fuse or a break in the supply wire
    • Open circuit in the earth wire to the seat module
    • Poor contact in the connections between the module and the harness
    • Open circuit in the CAN wires between the CEM and the seat module
    • The seat module does not suit the car, for example a used module with different software or hardware

    Hva du kan gjøre

    1. 1Test the seat with the adjustment controls. If it does not move at all, the seat module or its supply is probably at fault
    2. 2Check the seat fuses in the engine bay fuse box and in the CEM. If one has blown, check its circuit for a short to earth before replacing it
    3. 3Use a multimeter to confirm the wires from the CEM to the seat module have no break and no short to earth or supply
    4. 4Check that the earth point and the seat module connector are secure and free from corrosion or damage
    5. 5With a diagnostic tool, read the seat module ID. If it reads, the CAN communication is probably fine and the fault may be intermittent
    6. 6The CEM should not be replaced for this code, because the fault lies in the communication and not in the CEM itself

    Symptomer du kan merke1

    • Automatic adjustment of the seat and mirrors does not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.