Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-DE49
    VOLVO

    CEM-DE49 - Communication with the steering wheel module (SWM). Signal missing

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (5)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo V50 (2004–2013)2004–2012

    Hva betyr feilkoden?

    The CEM has lost contact with the steering wheel module (SWM), so functions controlled from the steering wheel do not work properly. This covers cruise control, the indicators, the steering wheel buttons and the wipers, which may only run at the lowest speed. The fault lies in communication on the low speed network.

    Mulige årsaker

    • No supply to the steering wheel module (SWM)
    • Open circuit in the earth wire to the steering wheel module
    • Contact resistance in the connections
    • Open circuit in the LS-CAN wires to the steering wheel module
    • The steering wheel module does not suit the car, for example a used module with other software or hardware

    Hva du kan gjøre

    1. 1With the ignition on, operate the indicator stalk. The indicators should flash. If they do not, the supply or communication to the steering wheel module is probably faulty
    2. 2Check that the steering wheel module fuses in the engine bay fuse box and in the CEM are intact
    3. 3Use a multimeter to check that the supply wire from the CEM to the steering wheel module has no break and is not shorted to earth
    4. 4Check the earth point of the steering wheel module for loose contact or oxidation
    5. 5With a diagnostic tool, read the steering wheel module ID. If it reads, the communication is probably fine. Press the wheel buttons and watch for changes in live data
    6. 6Do not replace the CEM before the communication fault with the steering wheel module has been checked

    Symptomer du kan merke4

    • Cruise control does not work at all
    • The wipers only run at the lowest speed
    • The turn signals do not work
    • The buttons on the steering wheel do not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.