VOLVO
CEM-8A09 - Low beam right. Faulty signal
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
CEM supplies the right low beam directly through an output. If CEM registers too low a current draw at the output, the fault code is set. This can be caused by a faulty or missing low beam lamp, a break in the signal wire or a short to voltage, and it shows when the low beam is on.
Mulige årsaker
- Low beam lamp faulty or missing
- Break in the signal wire to the right low beam lamp
- Signal wire short-circuited to voltage
Hva du kan gjøre
- 1Switch on the ignition, activate the low beam and check whether the right lamp lights
- 2If the lamp does not light, check that it is seated and intact
- 3Use a multimeter to check that the signal wire to the lamp has no break and no contact with voltage
- 4Remedy what is found and check that the low beam lights when activated
Symptomer du kan merke2
- Low beam does not work
- The low beam is lit all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.