VOLVO
CEM-4F41 - Seat belt buckle, right rear seat. Signal too high
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The CEM monitors the right rear belt buckle. If the voltage in the signal wire is too high, the code is set. The information lamp may light, and a message may appear in the display.
Mulige årsaker
- A short to supply voltage in the signal wire between the buckle and the CEM
- A short to supply voltage in the connector
- A short inside the seat belt buckle
- Cross-connected signal wires between the buckle and the CEM
Hva du kan gjøre
- 1Safety: the seat belt system is part of the crash protection. Do not work on the wiring or the buckle yourself. Have a workshop check the wires
- 2Look for chafed or pinched cables at the rear right seat belt, without removing anything
- 3Check that the belt latches and releases normally and that the buckle is not damaged
- 4After the work, clear the code and check that the information lamp goes out
Symptomer du kan merke2
- The information lamp is lit
- A message appears in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.