Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-DF05
    VOLVO

    CEM-DF05 - CAN-H, low speed network. Signal too low

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    10 modeller

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo S60 (2001–2009)2005–2009
    • Volvo S80 (1999–2006)2005–2006
    • Volvo V50 (2004–2013)2004–2012
    • Volvo V70 (2000–2008)2005–2008
    • Volvo V70 XC / XC70 (2001–2007)2005–2007
    • Volvo XC90 (2003–)2005–2015

    Hva betyr feilkoden?

    The CEM detects that CAN H in the low speed network has contact with earth, so the signal becomes too low. Communication between the control modules can then break down, and the gauges, instrument lighting, central locking and remote control may stop working. The fault most often lies in the network wiring.

    Mulige årsaker

    • Short to earth on the CAN H wire in the low speed network

    Hva du kan gjøre

    1. 1With the ignition on, check whether the gauges and instrument lighting work. Which functions are lost shows which control modules are affected
    2. 2With a diagnostic tool, read the fault codes from all control modules. Communication faults in several modules point to a shared fault in the network
    3. 3Use a multimeter to check that the CAN H wire has no contact with earth or the body along its length
    4. 4Check the connectors on the CAN network for loose connections, corrosion and moisture
    5. 5Gently flex the cable harness while watching the communication, to see whether the fault disappears or changes
    6. 6The CEM should not be replaced for a CAN fault unless a workshop has confirmed an internal fault in the CEM

    Symptomer du kan merke4

    • No gauges work
    • The instrument lighting does not work
    • Locking and unlocking with the remote control does not work
    • The central locking does not work at all

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.