Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-DE6E
    VOLVO

    CEM-DE6E - Communication with the transmission control module (TCM). Signal missing

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (5)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo V50 (2004–2013)2004–2012

    Hva betyr feilkoden?

    The CEM has lost contact with the transmission control module (TCM). As a result some gear changes do not happen, the malfunction indicator may light and a message can appear in the display. The fault is most often caused by supply, earth or a connector at the TCM.

    Mulige årsaker

    • No supply to the TCM
    • Open circuit in the earth wire to the TCM
    • Contact resistance in the connections
    • Open circuit in the LS-CAN wires to the TCM
    • The TCM does not suit the car, for example a used module with other software or hardware

    Hva du kan gjøre

    1. 1Switch the ignition on and check that the light on the gear selector panel comes on. If it does not, the TCM probably has no supply
    2. 2Check the TCM fuse in the engine bay fuse box and the TCM fuse in the CEM. If one has blown, check its circuit for a short to earth before replacing it
    3. 3Use a multimeter to check that the wires from the fuse box and from the CEM to the TCM have no break
    4. 4Check the TCM earth wire and earth point for play and oxidation
    5. 5With a diagnostic tool, read the TCM ID. If it reads, the communication is probably fine and the fault may be intermittent
    6. 6After the repair, clear the fault code and road test to check that gear changes work and the fault does not return

    Symptomer du kan merke3

    • Gear changes do not happen
    • The malfunction indicator lamp is lit
    • A message appears in the text display

    Hva feilen kan påvirke1

    • A substitute gear is engaged instead of the selected gear

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.