VOLVO
CEM-DE63 - communication with the parking assistance module (PAM). Signal missing
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The CEM has no contact with the parking assistance module (PAM), so the park assist does not work. The fault most often lies in the supply to the PAM, its earth or the connector at the module. It can also be a break in the LS-CAN wiring.
Mulige årsaker
- No supply to the PAM
- Open circuit in the earth wire to the PAM
- Contact resistance in the connections
- Open circuit in the LS-CAN wires to the PAM
- The PAM does not suit the car, for example a used module with other software or hardware
Hva du kan gjøre
- 1Engage reverse and release the handbrake. If the park assist text does not appear in the display, the fault is probably in the PAM or its supply
- 2Check the PAM fuse in the CEM. If it has blown, check the circuit after it for a short to earth before replacing it
- 3Use a multimeter to check that the supply wire from the CEM to the PAM has no break and is not shorted to earth
- 4Check the PAM earth point for contact resistance and oxidation, and that the wire to it is not broken
- 5With a diagnostic tool, read the PAM ID. If it reads, the communication is probably fine and the fault may be intermittent
- 6Check the supply first before replacing any part, since that is where the fault most often lies
Symptomer du kan merke1
- The park assist system does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.