VOLVO
ABS-0093 - Control module communication. Control module communication
System
Bremssystem (ABS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The ABS control module has registered that the load signal from the engine control module is missing. That signal is used to regulate the anti-spin function, and without it the ABS module cannot judge how much the engine contributes to wheel movement. The code therefore mainly concerns anti-spin, and the cause is normally in the engine management system.
Mögliche Ursachen
- Fault in the engine management system
- Poor contact in the communication between the engine control module and the ABS module
Was Sie tun können
- 1Read the codes in the engine control module and deal with any faults there first
- 2See whether the communication wiring between the modules runs close to electric motors or ignition cables
- 3Remedy any wiring faults and clear the code
- 4If the fault remains, have a workshop with diagnostic equipment check the signal from the engine control module
- 5ABS is safety-critical – do not work on the brake system yourself, have a workshop do it
Symptome, die Sie bemerken können2
- Anti-spin warning lamp lit
- Anti-spin does not work
Was der Fehler beeinflussen kann1
- Anti-spin function is disengaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.