VOLVO
ABS-00A2 - Side acceleration sensor. Signal faulty. Intermittent fault
System
Bremssystem (ABS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The lateral acceleration sensor tells the ABS control module how strong the car's sideways acceleration is. The code applies only to cars with stability control. At some point the module received a faulty signal, and the fault is intermittent, meaning temporary. While it lasts, anti-spin and the stability function are blocked.
Mögliche Ursachen
- Open circuit in the wiring
- Wiring shorted to ground or supply voltage
- Sensor incorrectly fitted
- Faulty sensor or, less commonly, a faulty control module
Was Sie tun können
- 1Check that the sensor is correctly fitted and firmly secured in its bracket
- 2Check the connector at the control module and at the lateral acceleration sensor for contact resistance and oxidation
- 3Follow the wire to the sensor and look for intermittent open circuits or shorts to ground or supply voltage
- 4Remedy as necessary, clear the code and road test
- 5ABS and stability control are safety-critical – do not work on the ABS module or the brake system yourself, have a workshop do it
Symptome, die Sie bemerken können3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Was der Fehler beeinflussen kann2
- Anti-spin function is blocked
- Stability function is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.