VOLVO
ABS-00B1 - Pedal pressure sensor. Signal faulty. Intermittent fault
System
Bremssystem (ABS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The pedal pressure sensor sits inside the brake booster and tells the ABS control module when stability control has to be disengaged, for example when the driver presses the brake. At some point the module registered a faulty signal from the sensor, and the fault is intermittent. This code applies only to cars with stability control, while anti-spin and stability are blocked.
Mögliche Ursachen
- Resistance build-up or corrosion at the plugs and joints
- Open circuit in the wiring
- Wiring shorted to ground or supply voltage
- Faulty pedal pressure sensor or defective control module
Was Sie tun können
- 1Inspect the plugs on the ABS module and on the pedal sensor for resistance and corrosion
- 2Check that the sensor wiring has no breaks or chafing, especially if the fault is intermittent
- 3Remedy as necessary and road test
- 4Clear the code and check whether it returns
- 5If the fault remains, have a workshop with diagnostic equipment check the sensor and the module
- 6ABS and stability control are safety-critical – do not work on the brake booster or brake system yourself, have a workshop do it
Symptome, die Sie bemerken können3
- Stability function is absent
- Anti-spin function does not work
- Anti-spin warning lamp lit
Was der Fehler beeinflussen kann2
- Anti-spin function is blocked
- Stability function is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.