VOLVO
ABS-00C2 - Reversing signal. Unreasonable signal
System
Bremssystem (ABS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The reversing signal tells the ABS control module that the car is in reverse. The module has registered a signal that does not fit the other conditions, so the code is set. This code applies only to cars with stability control, and anti-spin and stability are blocked while it is present.
Mögliche Ursachen
- Faulty signal from the reversing light sensor or switch
- Short or open circuit in the reversing signal wire
- Faulty ABS control module
Was Sie tun können
- 1Check that the reversing lights work when reverse gear is selected
- 2Check the connectors at the gear selector and the reversing signal for poor contact and oxidation
- 3Follow the reversing signal wire and look for an open circuit or a short to ground or supply voltage
- 4Clear the code and road test in reverse to see whether it returns
- 5If the fault remains, have a workshop with diagnostic equipment check the signal and the ABS control module
- 6ABS and stability control are safety-critical – do not work on the ABS module or the brake system yourself, have a workshop do it
Symptome, die Sie bemerken können3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Was der Fehler beeinflussen kann2
- Anti-spin function is blocked
- Stability function is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.