VOLVO
ADM-0001 - Additive dosing module (ADM). Internal fault
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Nur Motor: D4164T
Was bedeutet der Fehlercode?
The additive dosing module (ADM) has detected an internal fault in itself. The ADM is fitted to diesel cars with a particulate filter and doses an additive into the fuel that helps the soot in the filter burn off more easily during regeneration.
Mögliche Ursachen
- Internal fault in the additive dosing module (ADM)
- A one-off disturbance as the module started up, if the fault has only occurred once
Was Sie tun können
- 1Clear the code and see whether it returns – a single intermittent fault can be a temporary disturbance
- 2Check that the battery is in good condition, as low voltage at start-up can cause false internal faults
- 3If the fault returns or is permanent, the additive dosing module needs replacing
- 4Have the particulate filter checked if the car has been driven with the fault for a long time
Symptome, die Sie bemerken können2
- Message in the information display
- Engine (emissions) warning lamp on
Was der Fehler beeinflussen kann1
- No immediate effect on driving, but without additive the particulate filter is harder to regenerate and may eventually block
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.