VOLVO
ADM-0003 - Level sensor, additive. Faulty signal
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2010Nur Motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Nur Motor: D4164T
Was bedeutet der Fehlercode?
The level sensor for the additive gives the additive dosing module (ADM) a signal that cannot be trusted. The ADM checks the sensor's function with the ignition on, and when the signal is faulty or implausible the code is set. Because the sensor is built into the additive tank, the tank itself may need replacing if the fault persists.
Mögliche Ursachen
- Poor contact, resistance or corrosion at the terminals
- Break in the signal wire, or a short to ground or to supply voltage
- Damaged additive level sensor
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Check the connector at the additive tank for looseness, contact resistance and oxidation
- 2Clear the code and check whether it returns
- 3If the fault returns with no visible cause, the additive tank may need replacing because the sensor is built into it
- 4After any repair, have a workshop restart the module with diagnostic equipment
Symptome, die Sie bemerken können2
- Message in the text window of the display
- Yellow warning symbol and text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.