VOLVO
ADM-0007 - Pump, additive. Signal too low
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Nur Motor: D4164T
Was bedeutet der Fehlercode?
The additive dosing module (ADM) has registered a short circuit to ground in the wiring to the additive pump. The ADM controls the pump, and a short to ground stops it working normally. The fault shows up as the emissions warning lamp, and because the pump sits in the additive tank, the tank may need replacing.
Mögliche Ursachen
- Short circuit to ground in the wiring to the additive pump
- Damaged additive pump
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Check the connector at the additive tank for damage and moisture
- 2Follow the pump wiring and look for chafing or damaged insulation
- 3Clear the code and check whether it returns
- 4If the code returns with no visible cause, the additive tank may need replacing
- 5If the fault remains, have a workshop with diagnostic equipment check the pump and the module
Symptome, die Sie bemerken können1
- Emissions warning lamp lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.