VOLVO
ADM-000B - Fuel level. Faulty signal
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Nur Motor: D4164T
Was bedeutet der Fehlercode?
The ADM has flagged the main fuel level reading on the data network as wrong. The signal comes from the central electronic module (CEM), so the fault usually starts there.
Mögliche Ursachen
- Fault in the central electronic module (CEM), which sends the fuel level signal
Was Sie tun können
- 1Read the codes in the central electronic module (CEM) first and deal with them
- 2Clear the code only after the fault in the CEM has been fixed
- 3Check the battery and its terminals, since voltage problems can disturb the data network
- 4If the fault remains, have a workshop with diagnostic equipment check the data network and the CEM
- 5Do not replace the CEM until a workshop has investigated the data network and confirmed an internal fault
Symptome, die Sie bemerken können1
- Emissions warning lamp lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.