Was bedeutet der Fehlercode ADM-E000?

Diagnose und Fehlercodedefinition für ADM-E000 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ADM-E000 - Control module. Faulty communication

System

Additiv-Dosiermodul (ADM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (9)

Was bedeutet der Fehlercode?

The additive dosing module (ADM) has registered serious interference on the high-speed CAN network, so its communication is blocked. The module then shuts itself down until the power supply is disconnected. Because it cannot communicate, the code can only be read if the fault is intermittent.

Mögliche Ursachen

Short circuit between the CAN wires
Open circuit in one of the CAN wires
Internal fault in the control module
Internal fault in another control module on the same part of the CAN network

Was Sie tun können

1Read the codes in the central electronic module (CEM), since it monitors the voltage on the CAN wires
2Check the battery and its terminals so the voltage is stable
3With diagnostic equipment measure the CAN network and look for breaks and shorts
4Do not replace the central electronic module for a CAN fault unless fault-finding shows it is faulty
5Clear the codes after the repair and check that they do not return

Symptome, die Sie bemerken können1

No clear symptoms for the driver

Was der Fehler beeinflussen kann2

The module shuts itself off and stays off until the power supply is disconnected
No communication with the other control modules on the network

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.